Energy Saver Modes - Ricoh J-P2 Service Manual

17 January, 2003
SP5-XXX (Mode)
5 Mode No.
(Class 1, 2, and 3)
[Language]
009
1 Language
024 mm/inch Display
1 mm/inch display
045 [Counter Method]
1 Counter Method
046 [Rom Update] ROM Update Display
1 ROM Update
101 [Energy Saver]
3 Energy Saver 1
4 Energy Saver 2
(Auto OFF mode)
104 [Double Count]
1 Double Count
PRINTER ENGINE SERVICE MODE
Function / [ Setting ]
*CTL Selects the language for the control panel.
# [ 0 to 16 / 2 / 1/step ]
Data Language
0
No language
1
Japanese
2 English
3 American
4 French
5 German
6
Italian
7 Spanish
8 Dutch
NOTE: When changing language, the main switch
has to be turned off and on to initialize the
system.
*CTL Display units (mm or inch) for custom paper sizes.
0: mm (Europe/Asia)
1: inch (USA)
*CTL Selects the counting method if the meter charge
mode is enabled with SP5-930-001.
[ 0 or 1 / 0 / - ]
0: Developments
1: Prints
NOTE: The counting method can be changed only
once, regardless of whether the counter
value is negative or positive.
*CTL Enables or disables the ROM Update utility. When
enabled, this utility will be displayed in the user
program mode.
[ 0 or 1 / 1 /- ] DFU
0: Enable
1: Disable
*CTL After the end of a job, the machine enters Energy
Saver mode (level 1) when this timer runs out.
[ 0 to 60 / 0 / 10 sec/step ]
*CTL After the end of a job, the machine enters Energy
Saver mode (level 2) when this timer runs out.
[ 0 to 3600 / 3600 / 60 sec/step ]
*CTL Specifies whether the counter is double clicked for
A3/DLT size prints.
[ 0 or 1 / 0 / - ]
0: Normal count
1: Double count
5-45
Data Language
9
Norwegian
10
Danish
11 Swedish
12 Polish
13 Portuguese
14 Hungarian
15
Czech
16 Finnish