Controller Functions - Ricoh J-P2 Service Manual

CONTROLLER

6.10.4 CONTROLLER FUNCTIONS

Sample Print
This feature was formerly known as "Proof Print." It requires installing an optional
HDD. This function gives users a chance to check the print results before starting a
multiple-set print run.
• The size of the hard disk partition for the sample print feature is 5.8 GB. This
partition is also used by the collation and locked print features.
• The partition can hold up to 30 files, including files stored using locked print.
• The partition can hold a log containing up to 20 errors, excluding jobs stored
using locked print.
• The maximum number of pages is 2,000, including jobs using locked print
and collation.
Locked Print
This feature requires installing an optional HDD. Using this feature, the print job is
stored in the machine but will not be printed until the user inputs an ID at the
machine's operation panel. This ID must match the ID that has been input with the
printer driver.
• Stored data is automatically deleted after it is printed.
• Stored data can be manually deleted at the operation panel.
• The partition can hold up to 30 files, including files stored using sample print.
• The partition can hold a log containing up to 20 errors, excluding logs stored
using locked print.
• The maximum number of pages is 2,000, including jobs using sample print
and collation.
• Locked print uses the same hard disk partition as sample print and collation,
which is 5.8 GB.
6-84
17 January, 2003