Preventive Maintenance; User Maintenance - Ricoh J-P2 Service Manual

17 January, 2003

2. PREVENTIVE MAINTENANCE

2.1 USER MAINTENANCE

The following maintenance kits are available for the customer to do PM.
Type A Color (C/M/Y) PCU
Type B Color (C/M/Y) Development Unit
Type C Fusing Unit
Type D Black Development Unit / Dust Filter
Type E Waste Toner Bottle
Type F Black PCU
Type G Oil Supply Unit
Type H Paper Feed Rollers
Chart: A4 (LT)/5%
Mode: 5 prints/job
Environment: Normal temperature and humidity
Yield may change depending on circumstances and print conditions.
When the machine's default settings are used, an error message is displayed when
a maintenance counter reaches the value in the PM table below, except for the
items in maintenance kit H.
NOTE: To have the machine display the message for maintenance kit H also, set
SP5-930-4 to 1.
After the user replaces the items in a maintenance kit, the machine automatically
resets the counter for this maintenance kit, except for the items in kit H.
NOTE: Except for the items in kit H, the machine can automatically detect when
new items have been installed.
The machine stops when the counters for parts in maintenance kits E and G reach
the replacement value in the following table.
NOTE: To have the machine display the alert only for maintenance kits E and G,
set SP5-930-3 to 0.
50KP
100KP
100KP
100KP
50KP
50KP
30KP
150KP
2-1
USER MAINTENANCE