Ricoh J-P2 Service Manual page 251

17 January, 2003
Mode No.
7
(Class 1, 2, and 3)
201 [Total Scan Counter]
1 Total Scan Counter
[DUnit Op Ctr] Development Unit Operation Counter
202
1 P: B&W
2 P: Color
3 D: B&W
4 D: Color
204 [Feed Counter] Paper Feed Section Counter
1 Tray 1
2 Tray 2
3 Tray 3/LCT
4 Tray 4
5 By-pass
6 Duplex
[ADF Total Counter]
205
1 ADF Total Counter
206 [Staple Counter]
1 Staple Counter
209 [Punch Counter]
1 Punch
301 [Copy Co.: Mag.] Copy Counter: Magnification
1 Reduce 25% <-->49%
2 Reduce 50% <-->99%
3 Full Size
4 Enlarge 101%<-->200%
5 Enlarge 201%<-->400%
6 Direct Mag.
7 Direct Size Mag.
8 Auto reduce/Enlarge
304 [Copy Co.: Copy Mode] Copy Counter: Copy Mode
1 Text
2 T/P (Glossy Photo)
3 T/P (Printed Photo)
4 T/P (Copied Photo)
5 Photo (Glossy Photo)
6 Photo (Printed Photo)
7 Photo (Copied Photo)
8 Generation Copy
9 Pale
10 Map
11 Punch
12 Repeat
13 Sort
14 Staple
15 Series
16 Erase
17 Duplex
18 ADF
PRINTER ENGINE SERVICE MODE
Function / [ Setting ]
* Displays the total number of scans.
CTL [ 0 to 9999999 / 0 / 1 scan/step ]
CF
*CTL Displays the number of prints or developments for
each mode.
*CTL Displays the number of sheets fed from each
paper feed station.
[ 0 to 9999999 / 0 / 1 sheet/step ]
NOTE: The LCT is counted as the 3rd feed
station.
* Displays the total number of originals fed by the
CTL ARDF.
CF
*CTL Displays the number of stapler operations.
*CTL Displays the number of times hole punching has
been done.
[ 0 to 9999999 / 0 / 1/step ]
* Displays the number of copies made with each
NV magnification ratio.
CF
* Displays the total number of copies made in the
NV copy mode by each operation mode.
CF
5-63