Notes For Transporting The Machine; Machine Stands - Ricoh J-P2 Service Manual

NOTES FOR TRANSPORTING THE MACHINE

17 January, 2003
1.5 NOTES FOR TRANSPORTING THE MACHINE

1.5.1 MACHINE STANDS

If it is difficult to slide the machine across the floor after installing the optional paper
feed unit or LCT, remove the two stands with the following procedure.
[A]
G080I910.WMF
[B]
G080I911.WMF
1. Remove all trays in the optional paper feed unit or LCT.
2. Remove the front stand [A] (! x 2).
3. Remove the rear stand [B] (! x 2, 2 brackets).
CAUTION: Reinstall the two stands in their original positions, or the machine might
tip over when drawing out the paper trays and so on.
1-10