OPTIONAL UNIT INSTALLATION
1.6.3 CF EXPANDER RACK
NOTE: 1) Section 1.6.4 shows the procedure for installing the Copier Feature
Expander in a machine equipped with the optional rack. Before installing
the CF expander, you must install the rack.
2) For the printer mainframe and printer option installation procedures,
please refer to the Operating Instructions "Set-up Guide."
3) To avoid a possible build-up of ozone, make sure to install the machine
in a room that is well ventilated.
!
CAUTION
Rating Voltage:
G367I914.WMF
For the ARDF
Rating voltage of output connector;
Maximum DC 24V
Scanner I/F Harness
Rating voltage of I/F harness connector;
Maximum DC 24V
1-18
17 January, 2003
G367I208.WMF