Ricoh J-P2 Service Manual page 34

17 January, 2003 OPTIONAL UNIT INSTALLATION
[A]
B377I200.WMF
[C]
[B]
B377I106.WMF
9. Connect the harnesses [A] and clamp them as shown.
10. Slide in the hopper [B].
11. Fasten the two 1-mm spacers [C] to the rear frame for future adjustment.
NOTE: The spacers are used to adjust the horizontal positioning of the punch
holes.
12. Reassemble the finisher and check the punch operation.
1-17