Scanner Sp - Ricoh J-P2 Service Manual

17 January, 2003

5.5 SCANNER SP

5.5.1 SP MODES
SP1-xxx (System and Others)
Mode No.
1
(Class 1, 2, and 3)
001 [System]
1 Model Name
2 Scanner Firmware
Version
3 Scanner Firmware
Number
4 Detail Model Name
002 [Error Log Display]
1 Error Log Display
003 [FTP Port Number]
1 FTP Port Number
004 [Compression Type]
1 Compression Type
005 [Erase margin]
1 Erase Margin
006 [Auto Reset Timer]
1 Auto Reset Timer
Function / [Setting]
* Displays the model name.
NV
Displays the scanner firmware version.
CF
Displays the firmware's part number.
Displays the detail model name.
*
Displays the error log data.
NV
CF
* Changes the FTP port number.
NV
After changing this value, do the following:
CF
1. Run the Registry Editor
2. Access
/HKEY_LOCAL_MACHINE/SOFTWARE/
Ricoh/NetworkScanner
3. Change the value of 'PortNo' to this SP
mode's value
[0 to 65535 / 3670 / 1/step ]
* Selects the compression type for binary picture
NV processing.
CF
[ 1 to 3 / 3 / 1/step ]
1: MH, 2: MR, 3: MMR
* Creates an erase margin for all edges of the
NV scanned image.
CF
If the machine has scanned the edge of the
original, create a margin.
[0 to 5 / 0 / 1 mm/step ]
* Adjusts the auto reset timer for the scanner
NV function.
CF
If this is "0", the auto reset function is disabled.
[0 to 99 / 60 / 1 sec/step ]
5-85
SCANNER SP