ADASH Ltd.
Before You Start
Ignoring any of the recommendations mentioned below may cause failure of the
Handling voltage higher then 24 V can cause an accident.
1. Always connect only ICP type sensors into an ICP marked socket !
If unsure, consult the procedure with your supplier.
2. Never plug this instrument into 230 V household voltage !
3. To power this instrument, use batteries with max. nominal voltage of 1.5 V!
4. To power this instrument, use only alkaline or rechargeable (NiCd, NiMH) batteries.
Regular carbon-zinc batteries are not suitable.
Use correct battery polarity.
Incorrect polarity will cause destruction of the
Listen at moderate volumes to avoid hearing
Remove the headphones from the ears when
you move the sensor or re-connect cable.
Further technical and contact information can be found at www.adash.com
instrument.
WARNING!
instrument!
HEADPHONES WARNING!
damage.
14
Adash 4900 – Vibrio M