Emerson Powerdrive F300 Reference Manual page 210

Parameter 11.054 Drive Date Code
Short description Shows the drive date code
Mode Open‑Loop
Minimum 0
Default
Type 16 Bit Volatile
Display Format Standard
Coding RO, ND, NC, PT, BU
Drive Date Code (11.054) is a four-digit number in the form yyww where yy is the year and ww the week number.
Parameter 11.055 Onboard User Program: Clock Task Scheduled Interval
Short description Displays the interval at which the clock task is scheduled in ms
Mode Open‑Loop
Minimum 0
Default
Type 32 Bit Volatile
Display Format Standard
Coding RO, ND, NC, PT
Onboard User Program: Clock Task Scheduled Interval (11.055) shows the interval at which the clock task is scheduled to run at in ms.
Parameter 11.056 Option Slot Identifiers
Short description Defines the order that option slots are used by the drive
Mode Open‑Loop
Minimum 0
Default 0
Type 8 Bit Volatile
Display Format Standard
Coding RW, TE, PT
Value Text
0 1234
1 1243
2 1324
3 1342
4 1423
5 1432
6 4123
7 3124
8 4132
9 2134
10 3142
11 2143
12 3412
13 4312
14 2413
15 4213
16 2314
17 3214
18 2341
19 2431
20 3241
21 3421
22 4231
23 4321
If Option Slot Identifiers (11.056) is set to its default value of 0 each option module is assigned the same slot number as its physical slot. For example
the module in physical slot 1 appears in slot 1 to all drive and option module software systems (i.e. it uses Menu 15 as its set-up menu and Menu 25 as
its application menu etc.). This arrangement can be changed by selecting a different value for Option Slot Identifiers (11.056). Although
Option Slot Identifiers (11.056) is a volatile parameter its value is saved in non-volatile memory when parameters are saved. If Option Slot Identifiers
(11.056) is changed the drive must be powered down and then powered up again for the change to take effect.
210
Maximum 65535
Units
Update Rate Background write
Decimal Places 0
Maximum 262140
Units ms
Update Rate Background write
Decimal Places 0
Maximum 23
Units
Update Rate Power-up and drive reset read
Decimal Places 0
Powerdrive F300 Parameter Reference Guide
Issue: 01.15.00