Date And Time Offset (06.084) is an offset, specified in hours, that can be applied to the Time (06.017). If the offset applied causes the time to roll-over
midnight then the Date (06.016) and Day Of Week (06.018) are also modified. The offset is only applied when the clock source is a clock derived from a
keypad or option module, i.e. Date/Time Selector (06.019) > 3. The offset can be used for time zone offsets or daylight saving time etc. It should be noted
that when the date and time is derived from an option module this may be in the form of UTC (Coordinated Universal Time) with an additional offset also
provided by the option module. The data and time is derived by adding the additional offset and the time from the option module and then