Emerson Powerdrive F300 Reference Manual page 114

Thermal monitoring is provided within the drive to protect the power stage and the control system from over temperature.
Monitored Temperature 1 (07.004), Monitored Temperature 2 (07.005) and Monitored Temperature 3 (07.006) give an indication of the temperature of
three selected monitoring points within the drive power system or control system. The required monitoring points can be selected using
Temperature Monitor Select 1 (07.038), Temperature Monitor Select 2 (07.039) and Temperature Monitor Select 3 (07.052) respectively. The default
values give two monitoring points in the power system in Monitored Temperature 1 (07.004) and Monitored Temperature 2 (07.005), and control board
temperature 1 in Monitored Temperature 3 (07.006).
Parameter 07.005 Monitored Temperature 2
Short description Displays the temperature set up by Temperature Monitor Select 2
Mode Open‑Loop
Minimum -250
Default
Type 16 Bit Volatile
Display Format Standard
Coding RO, ND, NC, PT
See Monitored Temperature 1 (07.004) for details.
Parameter 07.006 Monitored Temperature 3
Short description Displays the temperature set up by Temperature Monitor Select 3
Mode Open‑Loop
Minimum -250
Default
Type 16 Bit Volatile
Display Format Standard
Coding RO, ND, NC, PT
114
Maximum 250
Units °C
Update Rate Background write
Decimal Places 0
Maximum 250
Units °C
Update Rate Background write
Decimal Places 0
Powerdrive F300 Parameter Reference Guide
Issue: 01.15.00