Example Upgrade Via Ftp/Tftp Using The Cli; Preparing Installation Worksheets - Avaya G350 Installing And Upgrading

Hide thumbs Also See for G350:
Table of Contents

Advertisement

Use the copy ftp SW_imageB command to upgrade the G350 firmware into Bank B
from an FTP server
Use the copy tftp EW_archive command to upgrade the Java applet for Avaya G350
Manager software from a TFTP server
Use the copy tftp module command, followed by the module number of the module
you want to upgrade, to upgrade the firmware on a media module from a TFTP server
Use the copy tftp SW_imageA command to upgrade the G350 firmware into Bank A
from a TFTP server
Use the copy tftp SW_imageB command to upgrade the G350 firmware into Bank B
from a TFTP server

Example upgrade via FTP/TFTP using the CLI

To upgrade the firmware of an MM712 media module in slot 3 from a TFTP server with the IP
address 192.1.1.10, where the home directory is c:\home\ftp\ and the upgrade file is located in
the directory c:\home\ftp\version, use the following command:
copy tftp module \version\mm712v51.fdl 192.1.1.10 3
Note:
When uploading firmware from the S8300, use only the file name, without the
Note:
directory path, in the command line. Otherwise, the procedure will fail. For
instance, in the example above, you must use the following command:
copy tftp module mm712v51.fdl 192.1.1.10 3
Note:
When uploading firmware from the S8300 using TFTP, you may need to enable
Note:
TFTP service in the Set LAN Security parameters of your web server.
The following example uploads a firmware version with the path and file name C:\g350.net from
an FTP server with the IP address 149.49.134.153 to Bank A of the G350:
copy ftp SW_imageA C:\g350.net 149.49.134.153

Preparing installation worksheets

Before you perform the upgrade, you must enter the names of the target software and firmware
versions that you need to install in the software and firmware upgrade worksheet. If you will
need to set up a TFTP server, you also need to plan the TFTP server IP address, login, and
password.
Upgrading G350 firmware using the CLI via FTP/TFTP
Issue 7 November 2009
87

Advertisement

Table of Contents
loading

Table of Contents