Figure 3-7: Removing The Retention Screws; Figure 3-8: Inserting The Full-Size Pcie Mini Card Into The Slot At An Angle - IEI Technology IVS-300 User Manual

Figure 3-7: Removing the Retention Screws

Line up the notch on the card with the notch on the slot. Slide the PCIe Mini card
Step 4:
into the socket at an angle of about 20º (Figure 3-8).

Figure 3-8: Inserting the Full-size PCIe Mini Card into the Slot at an Angle

Secure the full-size PCIe Mini card with the retention screws previously removed
Step 5:
(Figure 3-9).
Page 20
IVS-300 Embedded System