Pcie Mini / Msata Card Installation; Figure 3-6: Pcie Mini Slot Location - IEI Technology IVS-300 User Manual

IVS-300 Embedded System

3.5 PCIe Mini / mSATA Card Installation

The PCIe Mini slot allows installation of either a full-size or half-size PCIe Mini card. To
install a full-size PCIe Mini card or an mSATA module, please follow the steps below.
NOTE:
The mSATA module is only supported on the ULT3 models.
Access the front side of the main board. See Section 3.4.
Step 1:
Locate the PCIe Mini slot (MINI-PCIE3) for mSATA module as shown in
Step 2:
Figure 3-6.

Figure 3-6: PCIe Mini Slot Location

Remove the two retention screws as shown in Figure 3-7.
Step 3:
Page 19