4.2.1.5 Installation of the 'ispVM' Program
ispVM is the CPLD program tool of Lattice and is installed to program the CPLD.
1) Access the web site of 'http://www.gtmkorea.co.kr/htmls/vander_lattice.html' in the
Internet explorer.
2) Click the followings in this order.
[Tool]
[Programming Software]
[ispVM System]
3) Download the program to the wanted directory of the PC and execute it.
4.2.2 Altera EPLD Programming
The boards of which the Altera EPLD should be programmed are the MGI board and the
4WLI board. The environment configuration is the same with that of the CPLD which has
been described previously, however, only the cable kit used for connection is different.
1) The following is the initial execution window.(MAX +plus II Programmer Only PGM )
Click the [MAX+PLUS II] menu.
© SAMSUNG Electronics Co., Ltd.
Figure 4.19 Initial Window of the Altera MAX+plus II Program
OfficeServ 7100 Service Manual
[ispVM System]
[Download Software]
4-17