Samsung OFFICESERV 7100 Service Manual page 180

CHAPTER 14. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
3) z: Power On/Off selection
0: Power Off
1: Power On
Result display
− OK: The power of the corresponding slot is normally turned on/off.
LCPM
Test item: This checks the memory of the LCP board. This is used for checking the
DRAM of the LCP board.
Result display
− OK: The memory status of the checked LCP board is normal.
− FAIL: The memory status of the checked LCP board is abnormal.
PRIMx
Test item: This checks if the TEPRI board operates normally.
When entering this command, the MP10/11 board reports the result of checking the
board to the TEPRI board of the corresponding slot. The corresponding board
performs self-checking, and then reports the result to the MP10/11 board, and the
MP10/11 board displays the test result. 'x' is the information on the location where the
TEPRI board is mounted.
1) x: Slot number
When mounting on the slot 3: 2
When mounting on the slot 4: 3
When mounting on the slot 5: 4
Result display
−
PASS: The corresponding TEPRI board operates normally.
− FAIL: The corresponding TEPRI board operates abnormally.
FALCx
Test item: This checks if the FALC(Framing and Line Interface Component for E1 or T1)
element of the TEPRI board operates normally.
When entering this command, the MP10/11 board reports the result of checking the
board to the TEPRI board of the corresponding slot. The corresponding board
performs self-checking on the FALC element of the TEPRI board and then reports the
result to the MP10/11 board, and the MP10/11 board displays the result.
'x' is the information on the location where the TEPRI board is mounted.
4-24
© SAMSUNG Electronics Co., Ltd.