Samsung OFFICESERV 7100 Service Manual page 178

CHAPTER 14. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
4.3.3.1 Offline Program Command
This part describes the commands used in the offline program.
SMRD
Test item: This checks the status of the Smartmedia.
Result display
−
OK: The status of the Smartmedia which has been checked is normal.
−
FAIL: The status of the Smartmedia which has been checked is abnormal.
BMEM
Test item: This checks the basic memory(DRAM 64 Mbytes, SRAM 4 Mbytes) of
MP10/11.
Result display
− PASS: The status of the checked memory is normal.
−
DRAM: The DRAM area of the checked memory is abnormal.
−
SRAM: The SRAM area of the checked memory is abnormal.
FANC
Test item: This checks the operation status of the fan 1 and the fan 2. If the problem occurs,
the location of the fan where the problem has occurred is displayed as FAIL/FAN1 or
FAIL/FAN2.
Result display
− PASS: The status of the checked fan is normal.
−
FAIL/FAN1: The fan 1 is abnormal.
−
FAIL/FAN2: The fan 2 is abnormal.
DMFR
Test item: This checks the status of the DTMF Receiver of the SCM board or the MFM
board. One MFM board supports twelve DTMF Receiver channels.
Result display
− PASS: Twelve of the DTMF Receivers of the MFM board are normal.
−
Fail/nn/../: The nn channel of the MFM board is abnormal.(nn=00~11)
−
For example, if 'Fail/01/03/10/' is displayed, this indicates that the DTMF
Receiver of the channel 01/03/10 of the MFM board is abnormal.
4-22
© SAMSUNG Electronics Co., Ltd.