Rcm Board - Samsung OFFICESERV 7100 Service Manual

3.5.3 RCM Board

This part describes the method to solve the problem which occurs in the RCM board.
3.5.3.1 When the RCM Board Is Not Recognized
The method to solve the problem when the RCM board is not recognized is as follows:
Check if the RCM board is properly
mounted on the MP10/11 board.
Check the CPLD version.
Is the CARD ID recognized?
Yes
End
© SAMSUNG Electronics Co., Ltd.
No
Replace CPLD(U8).
OfficeServ 7100 Service Manual
3-59