Table of Contents
Advertisement
10
SLA 750 SERIES SYSTEM REQUIREMENTS AND SETUP
10.1 Remote Access
1. From the UI, select Settings>Users
2. Select Remote Connections check box.
3. Select Add User from either Active Users or Standard Users.
4. Go to any web browser and enter IP address of printer followed by ":333" ( ie. https://xx.xx.xx.xxx:333/)
10.2 3D Connect
This printer is 3D Connect capable. For more information, please visit the link below:
https://www.3dsystems.com/software/3d-connect
3D Systems, Inc.
86
p/n 40-D150, Rev. C
Advertisement
Table of Contents
