VTI Instruments EX1000A User Manual page 49



a) Navigate to Start → Settings → Network Connections.
b) Right click on the NIC card that the EX10xxA mainframe is connected to and select
c) Select Internet Protocol (TCP/IP) and click Properties.
EX10xxA/EX10xxA-51C/RX10xx Preparation for Use
F 2-9: C
IGURE OMPLETED
Click the Submit button. Once this is done, it is no longer possible to communication
with the EX10xxA mainframe. This is normal and is addressed in the following steps.
Set a static IP address for the NIC card by doing the following:
Properties.
F
IGURE
EX10 A M S
XX AINFRAME TATIC
2-10: TCI/IP S
ELECTION
www.vtiinstruments.com
IP C
ONFIGURATION
49