Vtex10Xxa_Set_Vtb_Wiredor_Bias - VTI Instruments EX1000A User Manual

VTI Instruments Corp.
F P
UNCTION ROTOTYPE
ViStatus vtex10xxA_set_vtb_wiredor_bias (ViSession vi, ViInt32 wiredor_bias);
F P
UNCTION ARAMETERS
vi = contains a session handle to the instrument. This handle is obtained by the function and remains valid until the
session is closed.
wiredor_bias = an integer input value that indicates the Wired-OR bias enabled state for all eight LXI Trigger Bus
lines. Only the least significant bits are used. The least significant bit of the integer represents LXI Trigger Bus
least significant bit corresponds to LXI Trigger Bus line 7. A value of "1" value for any of the
th
line 0, where the 8
eight bits indicates that the wired or bias mode is enabled for the particular LXI trigger bus line, while a "0"
indicates that it is disabled.
D I R V
ATA TEM ESET ALUE
wiredor_bias = 0
D
ESCRIPTION
This function sets the Wired-OR bias enable state for each LXI Trigger Bus lines.
E
XAMPLE
268

vtex10xxA_set_vtb_wiredor_bias

EX10xxA/RX1032/EX1044 Function Calls