Installation Location; Installation Options; Rackmount Installation Option Of Ex10Xxa - VTI Instruments EX1000A User Manual

VTI Instruments Corp.

Mating connector for P1 13-Pin circular connector and J1 RJ45 mating shell connector

Calibration certificate

EX1044 Quick Guide Hardcopy
CD Contents:

LXI Quick Start Guide

EX10xxA/RX10xx/EX1044 User's Manual (this manual)

Product Drivers and Product Manuals CD

Agilent IO Library Distribution CD

EXLab software/ Manual (Optional)
It also contains IVI shared components required to be installed for the device identification purpose.
LXI discovery utility & Bonjour setup are provided in the CD which is helpful to discover the
EX1044 and other LXI device connected in the network.
All components should be immediately inspected for damage upon receipt of the unit.
I L
NSTALLATION OCATION
The EX10xxA is designed to be largely insensitive to external electrical, magnetic, and thermal
disturbances. However, as with all precision instrumentation, certain precautions, if taken into
consideration, can help achieve maximum performance.
1) The unit, particularly its front panel, should be located away from sources of high or low
temperatures. When used in a rack-mount application with other heat-generating instruments,
the EX10xxA should be located as far away from the other instruments as possible, 1U
minimum. Multiple EX10xxAs, however, can be stacked directly on top of one another without
any performance degradation.
2) The front panel of the EX10xxA should not be exposed to strong air currents. Typical
problematic sources include building ventilation and instrument or cabinet fans.
3) The unit should be located away from sources of high magnetic fields such as motors,
generators, and power transformers.
I O
NSTALLATION PTIONS
The EX10xxA has three options which can installed prior to installation:

Rackmount Installation Option (P/N: 70-0355-900)

Rack Ear Installation Option (P/N: 70-0355-901)

Tabletop Installation Option (P/N: 70-0355-902)
These options are not included with the EX10xxA and must be ordered separately.

Rackmount Installation Option of EX10xxA

The rackmount installation option includes all the parts necessary to mount the EX10xxA to the
front and rear of a standard test rack.
Required Tools
1) #2 Phillips screwdriver
2) 5/16" wrench or socket
Parts List
Item#
36
Qty Description VTI P/N
EX10xxA Preparation for Use