VTI Instruments EX1000A User Manual page 278

VTI Instruments Corp.
Error Code Error Message
0xBFFC0939L #define VTEX10XXA_ERROR_CAL_MODE_ONLY
0xBFFC093AL #define EX1048_ERROR_NO_SERIAL_NUMBER
0xBFFC093BL #define EX1048_ERROR_NO_MAC_ADDR
0xBFFC093CL #define EX1048_ERROR_CAL_FILENAME_TOO_LONG
0xBFFC093DL #define EX1048_ERROR_LOADING_CAL_FILE
0xBFFC093EL #define EX1048_ERROR_INVALID_VOLTAGE_RANGE
0xBFFC093FL #define EX1048_ERROR_INVALID_RANGE_FOR_TC_CONVERSION
0xBFFC0940L #define EX1048_ERROR_OTD_NOT_ALLOWED_IN_10V_RANGE
278
Meaning
The calibration mode must be > 0.
A device without a serial number has made a call
has that requires a serial number.
A device without a MAC address has made a call
has that requires a MAC address.
The calibration file name has overflowed the
calibration[] buffer set by
vtex10xxA_get_calibration_file.
The device is unable to load the calibration file
(i.e., the file may not exist).
A channel has been set to an invalid voltage
range (i.e. a thermocouple channel has been set
to 10 V while in voltage mode).
TC conversions can only be in the 67 mV range.
Hardware is not useful on this range.
EX10xxA/RX1032/EX1044 Function Calls