VTI Instruments EX1000A User Manual page 126

VTI Instruments Corp.
API
vtex10xxA_get_arm_count
vtex10xxA_get_arm_delay
vtex10xxA_get_arm_infinite
vtex10xxA_get_arm_lan_eventID
vtex10xxA_get_arm_lan_filter
vtex10xxA_get_arm_source
vtex10xxA_get_arm_sourceEx
vtex10xxA_get_calibration_file
vtex10xxA_get_calibration_running
vtex10xxA_get_channel_conversion
vtex10xxA_get_channel_range
vtex10xxA_get_channel_type
vtex10xxA_get_dio_input
vtex10xxA_get_dio_limit_event
vtex10xxA_get_dio_limit_event_invert
vtex10xxA_get_dio_limit_event_latch
vtex10xxA_get_dio_output
vtex10xxA_get_dio_output_enable
vtex10xxA_get_fifo_config
vtex10xxA_get_fifo_count
vtex10xxA_get_filt_freq
vtex10xxA_get_init_cont
vtex10xxA_get_lan_event_domain
vtex10xxA_get_lan_event_source_state
vtex10xxA_get_lan_eventlog_count
vtex10xxA_get_lan_eventlog_enabled
vtex10xxA_get_lan_eventlog_overflowmode
vtex10xxA_get_limit_set0
vtex10xxA_get_limit_set0_manual
vtex10xxA_get_limit_set1
vtex10xxA_get_linear_correction
vtex10xxA_get_model
vtex10xxA_get_OTD_enable
vtex10xxA_get_ptp_info
vtex10xxA_get_scanlist
vtex10xxA_get_self_test_result
vtex10xxA_get_self_test_running
vtex10xxA_get_serialNumber
126
Description
Returns the arm count value.
Returns the arm delay.
Returns the enabled status of an infinite arm
count.
Returns the event ID of a LAN arm event.
Returns the filter for the LAN arm event.
Returns the enabled arm source events.
Returns the arm source events including LAN
events.
Returns the calibration file data for the specified
buffer.
Indicates if calibration is currently in progress.
Returns the engineering units (EU) conversion of
a specified channel.
Returns the input range of a voltage channel.
Returns whether specified channel is voltage or
thermocouple only channel.
Returns the current input state of the digital I/O
port.
Returns the enabled DIO limit events.
Returns the inverted operation of a DIO channel
linked as a limit event.
Returns the latch operation of a DIO channel
linked as a limit event.
Returns the programmed output state of the digital
I/O port.
Returns the output enable state of the digital I/O
port.
Returns the data format and overflow behavior of
the FIFO memory.
Returns the number of data pages (scans) in the
FIFO memory.
Returns current low-pass filter cutoff frequency of
a specified channel.
Returns the enabled status of init continuous
mode.
Returns the LAN domain for the instrument.
Returns the current arm and trigger state of the
LAN events.
Returns the number of event log entries logged in
the instrument.
Returns the current status of the event log.
Returns the LAN event log overflow mode.
Returns the limit set 0 values of a specified
channel.
Returns the manual entry control of limit set 0
values of a specified channel.
Returns the limit set 1 values of a specified
channel.
Returns linear correction of a voltage channel.
Returns the instrument's model name.
Returns a channel's open transducer detection
status.
Returns the instrument's PTP master and
synchronization information.
Returns the current scan list.
Returns the self test result (Currently supported
only in RX10xx)
Returns the running status of self test result.
(Currently supported only in RX10xx)
Returns the serial number of the device.
EX10xxA Function Calls