IQ12 Partial Image Deletions RAP
Areas of the printed image are light or missing entirely on limited areas of the paper
Initial Actions
Be sure the printer is installed on a level surface.
Procedure
Procedure
•
Switch Off the Power.
•
Remove the Print Cartridge.
•
Rotate the Print Cartridge side to side for 5 to 6 full rotations to redistribute the toner.
•
Reinstall and print 10 test copies.
The problem continues.
Y
N
Go to Call Closeout.
Check the Transfer Roller
PL 5.1
for the following:
•
Wear or damage.
•
The left and right tension springs for damage.
•
Be sure all parts are installed correctly.
Figure 1 Image Deletions
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
(Figure
1).
June 2014
3-11
Image Quality
IQ12