Connecting An Isdn Bri Trunk - Avaya G430 Installation And Upgrades

Connecting devices
Related links
Data and voice device connections

Connecting an ISDN BRI trunk

About this task
Connect the trunk to any ISDN port on an MM720, MM721 or MM722 media module.
Note:
In the US, you need to connect a separately purchased NT1 device to each ISDN port you use
to connect an ISDN BRI trunk.
Figure 20: The MM720 media module
Figure 21: The MM721 media module
Figure 22: The MM722 media module
Related links
Data and voice device connections
Connecting devices to the MM717 and MM716 media modules
About this task
The MM716 and MM717 media modules each have a single 25-pair amphenol socket on the front
panel, intended for use with a punch down block.
Procedure
Connect the front panel connector to a punch down block.
You can terminate up to 24 endpoint devices on the connected punch down block.
February 2017
on page 44
on page 44
Installation and Upgrades for the Avaya Branch Gateway G430
Comments on this document? infodev@avaya.com
50