Installing The Upgrade Memory Kit - Avaya G430 Installation And Upgrades

Upgrading and replacing Field Replaceable Units
FW Version
No Fault Messages
When a VoIP module is successfully installed in the optional VoIP module slot, output for the
slot includes:
MEDIA SOCKET #2
------------------
Type
Description
Serial Number
HW Vintage
HW Suffix
Faults
When no VoIP module is installed in the optional VoIP module slot, the output for the slot
includes:
MEDIA SOCKET #2
------------------
Type
Description
Serial Number
HW Vintage
HW Suffix
Faults
Related links
Inserting or removing an MP10, MP20, MP80, or MP120 VoIP module

Installing the upgrade memory kit

The upgrade memory kit enables increasing the number of announcement files on the G430 from
256 to 1024, by storing them on a removable compact flash. This also increases the total amount of
announcement time from 45 minutes to four hours. However, since the announcements are played
from RAM, you must also increase RAM to 512 MB.
The upgrade memory kit contains:
• 1 GB compact flash memory card
• Two RAM memory cards. For the G430, use the 512 MB RAM card.
Related links
Field Replaceable Unit upgrades and replacements
The upgrade memory kit
Compact flash memory cards
The upgrade memory kit
The G430 has a single RAM slot housing a 256 MB RAM card. If you wish to support an increased
number of announcement files, you must upgrade the G430 memory by replacing the 256 MB RAM
card with a 512 MB RAM card.
February 2017
: 29.18.0
: No Fault Messages
: MP80 VoIP DSP Module
: VoIP DSP resource with 80 channels
: 07IS15812717
: 0
: B
: No Fault Messages
: UNKNOWN
: UNKNOWN
: UNKNOWN
: UNKNOWN
: UNKNOWN
: NOT PRESENT
on page 80
on page 82
Installation and Upgrades for the Avaya Branch Gateway G430
Comments on this document? infodev@avaya.com
on page 74
on page 74
80