Chapter 2: Installing the Branch Gateway
Branch Gateway installations
Installing the Branch Gateway consists of installing the Branch Gateway chassis, installing the
EM200 expansion module(s) if ordered, installing media modules, attaching ground conductors, and
connecting the power.
Related links
Roadmap for installing the Branch Gateway
Mounting the Branch Gateway chassis
Placing the Branch Gateway on a table
Roadmap for installing the Branch Gateway
About this task
Install these devices in the following order using the appropriate procedure described in this section:
Procedure
1. Branch Gateway chassis
2. EM200 expansion modules
3. Media modules
4. Ground conductors
5. Power to the EM200 expansion modules
6. Power to the Branch Gateway
Related links
Branch Gateway installations
Mounting the Branch Gateway chassis
You can mount the Branch Gateway in a rack, on a wall, or on a table.
February 2017
and EM200
on page 21
on page 21
on page 26
on page 21
Installation and Upgrades for the Avaya Branch Gateway G430
Comments on this document? infodev@avaya.com
21