The Front Panel Of The Avaya Mm717 Media Module - Avaya G430 Installation And Upgrades

LED Name
TST Test
ACT Activity
Related links
The front panel of the Avaya MM716 media module

The front panel of the Avaya MM717 media module

The MM717 high density DCP media module front panel has a 25-pair amphenol connector
supporting 24 Digital Communications Protocol (DCP) ports. To use the MM717 media module,
connect an amphenol cable to the port and to either a breakout box or a punch down block
containing RJ-45 or RJ-11 jacks, as needed. You can attach up to 24 two-wire DCP telephones to
these jacks. The MM717 does not support four-wire DCP telephones.
Figure 39: The MM717 media module front panel
Related links
Front panel description
MM717 ports on page 123
MM717 LEDs on page 124
MM717 ports
The MM717 contains a single 25-pair amphenol connector, which can be connected by an
amphenol cable to a breakout box or punch down block containing RJ-45 or RJ-11 jacks, as
needed.
Table 21: 25-pair amphenol connector pinout
Station port
1
2
3
4
5
6
7
8
February 2017
Color
Green
Yellow
on page 111
Cable pair
White
White
White
White
White
Red
Red
Red
Installation and Upgrades for the Avaya Branch Gateway G430
Comments on this document? infodev@avaya.com
Indication
Either a test is being performed on the module via
the server, or the module is performing a self-test
upon initial insertion
A device connected to the module is in use. This
can include a telephone that is off the hook.
on page 121
Blue
Orange
Green
Brown
Slate
Blue
Orange
Green
Front panel description
Table continues...
123