Restore Patient, Report, And User-Defined Presets - GE LOGIQ 9 Technical Manual

GE M S
EDICAL YSTEMS
D 2294854-100, R
IRECTION
8-15-5

Restore Patient, Report, and User-Defined Presets

1.) Place the Backup/Restore media (MOD or CD-R) in the drive.
2.) Select the UTILITY tab on the Touch Panel. Select SYSTEM, then BACKUP/RESTORE.
3.) Select everything under Restore by placing a check mark after Patient Archive, Report
8-15-6 Cycle System Power
1.) Do an auto-shut down
2.) Press the ON/OFF switch on the Control Panel once to display the SYSTEM - EXIT menu.
3.) Select SHUTDOWN from the SYSTEM - EXIT menu.
Figure 8-83 System Exit Menu for Back-end Processor Power Down
4.) Power up the system for functional check-out.
8-74
PROPRIETARY TO GE
3
EVISION
Archive, System Configuration, and User Defined Configuration. Then press RESTORE.
Section 8-15 - System Setup
LOGIQ™ 9 P
ROPRIETARY
M
ANUAL