Chargers; Desktop Charger; Charging Rack; Battery Pack Charger - ASCOM d62 User Manual

User Manual
Ascom d62 DECT Handset
Battery
The battery is a rechargeable Li-pol battery, placed under a battery cover. See
Replace the Battery
The battery is fully charged within four hours. See
The battery can be charged separately with a special battery charger. See
Spare Batteries
2.2

Chargers

2.2.1

Desktop Charger

Figure 2. Desktop chargers.
There are two desktop chargers available, one basic that only charges the handset and one
with advanced functionality to download new software and to synchronize parameters. The
handset is fully operational while placed in the charger.
The charger is delivered with a plug-in power supply and is connected into an ordinary wall
socket. For more information, see the Installation and Operation Manual for DC4 Desktop
Charger.
NOTE: Only use the charger within the temperature range of +5° C – +40° C.
IMPORTANT:
2.2.2

Charging Rack

The Charging Rack is used for charging several handsets, to synchronize parameters, and for
software download.
The built in power supply can charge up to six handsets.
See the Installation and Operation Manual for CR3 Charging Rack.
2.2.3

Battery Pack Charger

The Battery pack charger is used for charging up to six spare batteries.
8 April 2016 / Ver. M
on page 83.
on page 83
Advanced
Only use the provided power supply, see the Installation and Operation
Manual for DC4 Desktop Charger.
15.1.2 Charge the Battery
15.1.3 Charge
Basic
TD 92477EN
15.1.4
on page 83.
6