Edit Contact; Set Ring Signal For A Contact; Delete Contact; Central Phonebook - ASCOM d62 User Manual

User Manual
Ascom d62 DECT Handset
8.7.3

Edit Contact

1 Select "Edit contact".
2 Select contact, and press "Edit" twice.
3 Enter new name/number, and press "OK".
Tip: A variable or the character U can be added to the Work/Mobile/Other number
field to allow the user to enter additional numerical characters before calling the
number. See
4 Press "Save".
8.7.4

Set Ring Signal for a Contact

A specific ring signal can be set for each contact.
1 Add/edit a contact according to
on page 66.
2 Select "Ring signal"
3 Select the ring signal to be used for the selected contact.
4 Press "Back" and the press "Save".
8.7.5

Delete Contact

1 Select "Delete contact".
2 Select contact, and press "Delete".
3 Press "Yes" to confirm.
8.7.6

Central Phonebook

In the Central Phonebook can be searched by name or number. The last search result can be
displayed.
When the search result is returned the contact information can be viewed. A number can be
assigned to the new contact and a message sent by selecting the "More" soft key. The
number can also be called by selecting the "Call" soft key.
1 Select "Central phonebook".
Search by Name
1 Select Search by name.
2 Enter First name and/or Last name.
TIP: When searching for a contact, adding and editing a contact, the input language can be
changed temporarily by long pressing
characters in a foreign language.
3 Select "Search". The search result is displayed.
Search by Number
1 Select "Search by number".
2 Enter handset number, select "Search". The search result is displayed.
8 April 2016 / Ver. M
9 Procedure Call on page 73 for more information.
8.7.2 Add Contact
. This can be used to temporarily access
TD 92477EN
on page 65 or 8.7.3 Edit Contact
66