ASCOM d62 User Manual page 64

User Manual
Ascom d62 DECT Handset
1 Select "Call services".
2 Select "Absence".
3 Select the applicable absence reason in the list. The number of absence reasons (for
example "Lunch", "Meeting", "Trip" etc.) are configured in the PDM.
NOTE: The code is defined when configuring the absence reason in the handset. See the
Configuration Manual for more information.
4 Press "Select.
5 Enter time (HHMM) or date (MMDD) depending on the selected absence reason.
6 Press "OK".
The handset sends an absence reason code to the system by establishing a call. The call is
automatically disconnected after a few seconds.
Deactivate the Absence Setting
1 Enter "Call service" in the menu.
2 Select "Deactivate".
3 Press "Select".
Divert Calls
The user can divert calls to another extension.
1 Select "Divert calls".
Divert Internal/External Calls
1 Select "Internal" or "External".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press the soft key
the phonebook.
4 Press "OK".
The handset sends a diversion reason code to the system by establishing a call. The call is
automatically disconnected after a few seconds. The code is defined when configuring the
diversion reason in the handset. See the Configuration Manual for more information.
To stop diversion select "Deactivate" and press the confirmation button or the Soft key "OK".
Divert Calls if No Reply
1 Select "No reply".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press the soft key
the phonebook.
4 Press "OK"
The handset sends a diversion reason code to the system by establishing a call. The code is
defined when configuring the diversion reason in the handset. See the Configuration Manual
for more information. The call is automatically disconnected after a few seconds.
To stop diversion select "Deactivate" and press the confirmation button or the Soft key "OK".
8 April 2016 / Ver. M
TD 92477EN
to open
to open
57