Easy Replacement Procedure - ASCOM d62 User Manual

User Manual
Ascom d62 DECT Handset

15.2.2 Easy Replacement Procedure

During the Easy Replacement procedure, the LEDs of the handset and the charger follow the
same LED indications. This means that if the old handset has a broken display, the LED
indications on the charger and on the handset can be used to follow the replacement
procedure. Before and after easy replacement, the LEDs may have different LED indications.
For more details, see
IMPORTANT:
After the old handset has been in the charger, the new handset needs to be placed in the
charger regardless if the replacement was successful or not. Failing to do so may result in
malfunction that requires the new handset to be returned for service.
1
Figure 17. Easy Replacement via DC4 Advanced Desktop Charger.
1 On the new handset, press and hold
Note: Do not release
2 Put the new handset in the charger.
3 When the text "Start phone replacement?" is displayed, release
Press "Yes" (left soft key).
The text "Follow the instructions. Each step can take several minutes." appears in the
display. Press "OK"(left soft key).
8 April 2016 / Ver. M
LED Indications during Easy Replacement
Never remove a handset from the charger until the instructions in the
display or the LED tells you to do so (see status on the LED if the display is
broken). If there is an error indication it may be allowed to remove the
handset, see Figure 15. Update Completed while in Charger
further instructions.
New
New
2 3
until you are instructed to do so.
on page 86.
New Old
4, 8 7 5 6
TD 92477EN
on page 77 for
.
85