Profiles - ASCOM d62 User Manual

User Manual
Ascom d62 DECT Handset
8.6

Profiles

An own profile can be set up for incoming calls, message alerts, message volume, vibrating
alerts, key sound etc. This can be useful when there are many users on the same handset
who require different sound profiles. It can also be used for temporarily settings, for
example while in a meeting incoming calls should be silent. A user can then switch to his or
her own particular profile when using the handset.
If no profile is selected, the normal settings are used.
NOTE: The settings in a profile can be superseded if the corresponding settings in a system
profile are activated. When the system profile is activated, its settings are not displayed in
the handset menu. However, they can be displayed when a system profile is activated in the
handset. See
and d62 Protector only.
1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on the
Navigation key.
2 Select
Add New Profile
1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on the
Navigation key.
2 Select
3 Select "Add new".
4 Enter name of the profile.
5 Press "Save".
6 Press "More" and then select "Add setting".
7 Select the setting you want to add to the profile.
Repeat steps 6-7 if you want to add additional settings.
8 Mark the wanted setting and press "Edit" to make the changes.
A new profile based on another profile can also be created in the following way:
1 Enter the menu by pressing the "Menu" Soft key, or the confirmation button on the
Navigation key.
2 Select
3 Select "Add new".
4 Enter name of the profile.
5 Press "Save"
6 Press "More" and then select "Import from".
7 Select the profile which settings to be used for the new profile.
8 If needed, press "More" and then select corresponding option to add/import
additional settings or remove settings.
8 April 2016 / Ver. M
10 System Profiles on page 74. This feature is applicable for d62 Messenger
in the menu.
in the menu.
in the menu.
TD 92477EN
63