Maintenance; Maintenance Of Batteries; Battery Warnings; Charge The Battery - ASCOM d62 User Manual

User Manual
Ascom d62 DECT Handset
15

Maintenance

15.1 Maintenance of Batteries

15.1.1 Battery Warnings

During a call, only the corresponding battery warning signal notifies the user. The warning
signal cannot be silenced during a call. When not in call, the warning signal can be silenced
by pressing

15.1.2 Charge the Battery

Place the handset in the desktop charger or in the rack charger. The battery is being charged
when the LED on the handset is steady orange. When the battery is fully charged the LED is
green.
An animated battery icon
with its current charge and ending with the full charge. A filled battery icon
fully charged battery.
NOTE: Only use the prescribed chargers for charging.

15.1.3 Charge Spare Batteries

Spear batteries can be charged with a separate battery pack charger. It can charge six
batteries at the same time.

15.1.4 Replace the Battery

If the standby time for the handset becomes too low, the battery should be replaced by a
new one. Contact the system administrator or handset supplier for information about new
batteries. Attach the battery as described in the illustration below. The battery is easy to
replace. It is attached inside the battery lid and is connected to the handset in such a way
that no misalignment of the contact is possible.
8 April 2016 / Ver. M
The "Low battery" icon is displayed when the battery has 10% or less
remaining capacity left. In addition; a warning signal sounds every minute,
the LED flashing orange, and the dialog window "Battery low. Charge now."
appears.
The "Empty battery" icon is flashing when the battery has 5% or less
remaining capacity left. In addition; a warning signal sounds every second,
the LED flashing red, and the dialog window "Battery empty. Shutting
down." appears.
or .
is also shown in the display indicating charging by starting
TD 92477EN
indicates a
83