ASCOM d62 User Manual page 103

User Manual
Ascom d62 DECT Handset
A.4 Headsets
A number of Bluetooth headsets for different work situations have been tested together
with the handset. Refer to the Ascom Wireless Extranet Website for a list of verified
Bluetooth headsets.
Since the Bluetooth supports the Bluetooth 2.0 standard, other headsets may also work
although not verified by Ascom.
Note: The Bluetooth headset may have more or less functions than described here, refer to
the Manual for the Bluetooth headset.
A.5 Operation
Step between the menus with the navigation key
pressing the Soft key "Select".
A.5.1 Enable Bluetooth
To enable the Bluetooth function enter
select "Enable".
A.5.2 Pair and Connect a Bluetooth Headset
Before a headset can be used a connection (pairing) between the headset and the handset
must be established.
1 Place the Bluetooth headset and the handset next to each other.
2 Enable Bluetooth, see
3 Put the Bluetooth headset in pairing mode, see the user manual for the Bluetooth
headset.
4 On the handset enter
A dialog "Put headset in Pairing mode" is displayed.
5 Press "OK". It now searches for a Bluetooth headset to connect to.
6 When headset is found, press "Pair".
7 If needed, enter PIN code, see user manual for the Bluetooth headset. Press "OK".
The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth headset is also connected and this is indicated by the icon
headset.
A.5.3 Add another Bluetooth Headset
Up to eight headsets can be paired to the handset, but only one at a time can be selected. To
pair another headset repeat section "Pair and Connect a headset" steps 1-6.
The paired headsets are displayed by a default name in the handset menu "Headset". See
A.5.6Change the name of Bluetooth headset
A.5.4 Select a Bluetooth Headset
To activate a Bluetooth headset, enter
"Headset". Step with the navigation key,
soft key "Select", "Connection successful" is displayed. The headset is now selected.
When a new headset has been selected any previous headset is disconnected automatically.
8 April 2016 / Ver. M
in the handset menu, select Bluetooth and
A.5.1Enable Bluetooth.
in the menu, select "Bluetooth" > "Headset", "Add new".
in the handset menu, select "Bluetooth" >
or to the headset to be selected and press the
TD 92477EN
. Confirm each menu selection by
in front of the
96