Basic Operation; Switch The Handset On And Off; Log A Shared Phone On And Off - ASCOM d62 User Manual

User Manual
Ascom d62 DECT Handset
4

Basic Operation

4.1

Switch the Handset On and Off

Switch on the Handset
Press and hold
Switch off the Handset
Prerequisite: The handset is in idle mode:
Tip: While in a menu, press
must first be logged out to be able to switch off the handset. See
and Off. A user can be prevented from switching off the handset by enabling the parameter
Prevent switch off in PDM.
1 Press and hold
2 A dialog window "Switch off?" is displayed. Confirm by pressing "Yes".
NOTE: If a handset restriction is enabled, it may not be possible to switch off the handset.
See the handset's Configuration Manual.
4.2

Log a Shared Phone On and Off

NOTE: Shared phone is a license dependent feature and is applicable for IP-DECT systems
only. See the Configuration Manual for the Ascom d62 DECT Handset.
The feature shared phone allows more than one user to use a handset. When a handset is
configured to be a shared phone, it can be used by any shared phone user in the system. The
message and call lists are deleted when a user logs off a handset.
NOTE: If configured in the PDM/Device Manager, an emergency call can be made from a
handset that is logged off. See the Configuration Manual, Ascom d62 DECT Handset.
Log on a Handset
Prerequisite, the handset is switched on. See
information.
1 A dialog window "Login?" is displayed. Press the soft key "Yes".
2 Enter User ID and password.
3 Press "Login".
NOTE: The user will be automatically logged out from a previously used handset.
8 April 2016 / Ver. M
. When pressing , the handset vibrates and the display lights up.
to return to idle mode. If the handset is a shared phone, it
.
4.2Log a Shared Phone On
4.1Switch the Handset On and Off
TD 92477EN
for more
22