Baldor MicroFlex e100 Installation Manual page 91

3. In the Select Controller dialog, click Scan to search for the MicroFlex e100. Mint WorkBench
will scan the PC's ports for the MicroFlex e100.
When the search is complete, click 'MicroFlex e100' in the list to select it, then click Select.
Note: If the MicroFlex e100 is not listed, check the USB or Ethernet cable between the
MicroFlex e100 and the PC. Check that the MicroFlex e100 is powered correctly.
Click Scan to re-scan the ports.
MN1942
This check box is already selected for you. When you
click Select, it means that the Commissioning Wizard
will start automatically.
www.baldormotion.com
Configuration 6-11