Baldor MicroFlex e100 Installation Manual page 152

Keyword
MOTORDIRECTION
MOTORFEEDBACKANGLE
MOTORFEEDBACKOFFSET
MOTORFLUX
MOTORLINEARPOLEPITCH
MOTORLS
MOTORMAGCURRENT
MOTORMAGIND
MOTOROVERLOADAREA
MOTOROVERLOADMODE
MOTORPEAKCURRENT
MOTORPEAKDURATION
MOTORPOLES
MOTORRATEDCURRENT
MOTORRATEDFREQ
MOTORRATEDSPEEDMMPS
MOTORRATEDSPEEDRPM
MOTORRATEDVOLTS
MOTORROTORLEAKAGEIND
MOTORROTORRES
MOTORRS
MOTORSLIP
MOTORSPECNUMBER
C-10 Mint Keyword Summary
Description
To set or read the electrical direction of the motor.
Reads the instantaneous value of commutation angle for
the motor.
To set or read the electrical angle at which the absolute
position read from an EnDat, BiSS or SSI encoder is
zero.
To set the motor's magnetic flux level, to allow the drive
to accurately calculate motor torque and compensate for
back-EMF.
To set or read the distance between north poles on a
linear motor.
To set or read the motor leakage inductance.
To set or read the magnetizing current (I
induction motor.
To set or read the magnetizing inductance (L
induction motor.
Reads the extent of an overload condition.
To set or read the action taken in the event of a motor
overload condition.
To set or read the peak current rating of the motor.
To set or read the duration for which peak motor current
can be sustained.
To set or read the number of motor poles.
To set or read the rated current of the motor.
To set or read the rated frequency of an induction motor.
To set or read the rated speed of a linear induction motor
in millimeters per second.
To set or read the rated speed of an induction motor.
To set or read the rated voltage of an induction motor.
To set or read the rotor leakage inductance of an
induction motor.
To set or read the rotor resistance of an induction motor.
To set the motor stator resistance.
To read the slip of an induction motor.
To return the spec number of the motor.
www.baldormotion.com
) of an
m
) of an
m
MN1943