Baldor MicroFlex e100 Installation Manual page 153

Keyword
MOTORSTATORLEAKAGEIND
MOTORSTATORRES
MOTORTEMPERATUREMODE
MOTORTEMPERATURESWITCH
MOTORTYPE
MOVEA
MOVEBUFFERFREE
MOVEBUFFERLOW
MOVEBUFFERSIZE
MOVER
NETFLOAT
NETINTEGER
NODELIVE
NODESCAN
NODETYPE
NUMBEROF
NVFLOAT
NVLONG
NVRAMDEFAULT
OUT
OUTPUTACTIVELEVEL
MN1943
Description
To set or read the stator leakage inductance of an
induction motor.
To set or read the stator resistance of an induction
motor.
To set or read the action taken in the event of the motor
overtemperature trip input becoming active
To read the state of the motor overtemperature trip input.
To read or set the type of motor.
To set up a positional move to an absolute position.
To return the number of free spaces in the move buffer
for the specified axis.
To set or return the number of free spaces in the move
buffer before a move buffer low event is generated.
To set or return the size of the move buffer allocated on
the specified axis.
To set up a positional move to a relative position.
To access a controller's network data array, storing
values in floating-point format.
To access a controller's network data array, storing
values as integers.
To determine if a CAN node on the bus is currently live
or dead.
To scan a specific CAN bus for the presence of a
specific node.
To add or remove a CAN node to/from the CAN network.
Can also be read to determine the node type.
To return information about the abilities of the controller.
To read or write a floating-point value in non-volatile
memory.
To read or write a long integer value in non-volatile
memory.
To clear the contents of non-volatile RAM (NVRAM).
To set or read the state of all the outputs on an output
bank.
To set the active level on the digital outputs.
Mint Keyword Summary C-11
www.baldormotion.com