Baldor MicroFlex e100 Installation Manual page 144

Keyword
BUSEVENT
BUSEVENTINFO
BUSNODE
BUSPROTOCOL
BUSRESET
BUSSTATE
CANCEL
CANCELALL
CAPTUREBUFFERSIZE
CAPTURECOMMAND
CAPTUREDURATION
CAPTUREMODE
CAPTUREMODEPARAMETER
CAPTURENUMPOINTS
CAPTUREPERIOD
CAPTUREPRETRIGGER-
DURATION
CAPTUREPROGRESS
CAPTURESTATUS
CAPTURETRIGGER
CAPTURETRIGGERABSOLUTE
CAPTURETRIGGERCHANNEL
CAPTURETRIGGERMODE
CAPTURETRIGGERSOURCE
CAPTURETRIGGERVALUE
C-2 Mint Keyword Summary
Description
Returns the next event in the bus event queue of a
specific bus.
Returns the additional information associated with a bus
event.
To set or read the node ID used by this node for the
specified bus.
To read the protocol currently supported on a particular
fieldbus.
Resets the bus controller.
Returns the status of the bus controller.
To stop motion and clear errors on an axis.
To stop motion and clear errors on all axes.
To read the total size of the capture buffer.
Controls the operation of capture.
To define the total duration of the data capture.
To set or read the mode on a capture channel.
To specify a parameter associated with CAPTUREMODE.
To read the number of captured points per channel.
To define the interval between data captures.
To set the duration of the pre-trigger phase.
To return the progress of the pre-trigger or post-trigger
capture phase.
To return the progress of the capture.
To generate a capture trigger.
To ignore the sign of the trigger value when triggering
from a capture channel source.
To set the channel to be used as the reference source
for triggering.
To set the method used to evaluate the trigger source.
To set the reference source to be used for triggering.
To set the trigger value when triggering from a capture
channel source.
www.baldormotion.com
MN1943