Baldor MicroFlex e100 Installation Manual page 151

Keyword
LATCHTRIGGERCHANNEL
LATCHTRIGGEREDGE
LATCHTRIGGERMODE
LATCHVALUE
LIFETIME
LIMIT
LIMITFORWARD
LIMITFORWARDINPUT
LIMITMODE
LIMITREVERSE
LIMITREVERSEINPUT
LOADDAMPING
LOADINERTIA
MASTERCHANNEL
MASTERSOURCE
MOTORBRAKEDELAY
MOTORBRAKEMODE
MOTORBRAKEOUTPUT
MOTORBRAKESTATUS
MOTORCATALOGNUMBER
MN1943
Description
To select which of the fast latch inputs (or outputs) will
trigger a fast latch channel.
To define which edge polarity should cause the fast latch
to be triggered.
To select whether a fast latch is triggered by a digital
input or a digital output.
To return the instantaneous latch value that was
recorded by a fast latch.
Returns a lifetime counter for the drive.
To return the state of the forward and reverse limit
switch inputs for the given axis.
To return the state of the forward limit switch input for
the given axis.
To set the user digital input configured to be the forward
end of travel limit switch input for the specified axis.
To control the default action taken in the event of a
forward or reverse hardware limit switch input becoming
active.
To return the state of the reverse limit switch input for
the given axis.
To set the user digital input configured to be the reverse
end of travel limit switch input for the specified axis.
To define the equivalent viscous damping coefficient for
the motor and load.
To define the combined inertia of the motor and load.
To set or read the channel of the input device used for
gearing.
To set or read the source of the input device used for
gearing.
To specify engage/disengage delays associated with
motor brake control.
To activate or deactivate motor brake control.
To specify an output to be used as a control signal for a
braked motor.
To determine the state of the motor brake control.
To return the catalog number of the motor.
www.baldormotion.com
Mint Keyword Summary C-9