Using The Acu Cli; Opening The Cli In Console Mode - HP 166207-B21 - Smart Array 5302/32 RAID Controller Reference Manual

ACU displays possible logical drive configurations based on groupings of drives with the same
capacity.
For each logical drive, select a RAID Type.
4.
ACU identifies possible RAID configurations and lists spare drive capability, the size of the logical
drive, fault tolerance, and write performance.
Click Next.
5.
The wizard configures the arrays and logical drives.
When the configuration is complete, click Finish.
6.

Using the ACU CLI

The ACU CLI has two operating modes:
•
Console mode
You can adjust several configuration parameters on several devices without having to restart ACU
each time.
•
Command mode
You can make an isolated change of just one configuration parameter on one device.

Opening the CLI in Console mode

The syntax of the command required to open the ACU CLI in Console mode depends on the operating
system that you are using.
•
For Microsoft® Windows®, enter the following text:
("Opening the CLI in Console
("Opening the CLI in Command
mode" on page 54)
mode" on page 55)
HP Array Configuration Utility 54