Dump Mode - SATO WS408DT Technical Manual

3 System Mode

3.3.2 Dump Mode

Your printer enters Dump mode after running a self-test. In this mode, characters
are printed in hexadecimal codes, allowing users and engineers to debug the
system.
To return to the online mode:
Turn off your printer and turn it on again.
■
In SATO WS4 Printer Utility, in the Navigation pane, click Tool. In the
■
Properties pane, click Reboot Printer and click Send.
This is applicable for SZPL, SDPL and SEPL.
40
Self-Test and Dump
mode
WS4-DT-r01-30-12-16TM