Troubleshooting; Cutter And Dispenser Issues - SATO WS408DT Technical Manual

6 Troubleshooting

6 Troubleshooting
This chapter provides the information about accessories issues, internal errors and
their possible solutions.

6.1 Cutter and Dispenser Issues

Issue
The cutter is experiencing issues.
The dispenser is experiencing
issues.
Solution
If there is a paper jam, clear it.
■
The cutter has become loose. Fix the
■
cutter in position and tighten it.
The cutter blade is not sharp anymore.
■
Replace your cutter with a new one.
If there is a paper jam, clear it.
■
The dispenser has become loose. Fix the
■
dispenser in position and tighten it.
Make sure the liner is correctly threaded
■
under the plate and the dispenser.
98
Cutter and Dispenser Issues