SATO WS408DT Technical Manual page 74

4 SATO WS4 Printer Utility
Property Name
Module Restore Default
Network Type
Region
Channel
SSID
Port Number
Channel (Current)
SSID (Current)
DHCP
Host Name
EAP Method
Description
characters excluding double quotation marks
("). Pre-shared key authentication is for home
or small offices.
It resets all values in the Wireless LAN module.
It determines how you connect your printer to
a network.
Infrastructure If you connect through an
access point, select this.
Ad hoc if you connect through a device
which has connected to a network, select this.
In Ad hoc mode, you can only use Open
authentication.
The country or region.
The Wireless LAN channel. You need to use the
same channel as other devices for
communication. The available channel varies
according to your region.
The service set identifier. It is the name of a
wireless network.
The wireless LAN port number of your printer.
The current Wireless LAN channel.
The current service set identifier.
Auto It tries to get an IP address from a
DHCP server first. If failed, it uses the specified
one.
Enable It keeps trying to get an IP address
from a DHCP server until it succeeds.
Disable It uses the specified IP address.
It is the name of a DHCP client. The host name
allows up to 32 alphanumeric characters. You
can leave it blank or type a name you want. By
default, there is no host name.
It is available for 802.1X, WPA-Enterprise and
WPA2-Enterprise authentication.
EAP-LEAP LEAP stands for Lightweight
Extensible Authentication Protocol. It changes
70
Work with SATO WS4 Printer Utility