SATO WS408DT Technical Manual page 69

4 SATO WS4 Printer Utility
Property Name
IP Address (IPv6)
Interface ID
IP Address
(Current IPv6)
Link-Local Address
Set up IPv6 connection
Before you set up IPv6, make sure you have IPv6 connectivity.
1. Do one of the following to configure your IPv6 settings:
If you have a static IPv6 address, in the Mode list, click MANUAL; in the IP
•
Address box, enter your IPv6 address, and click Send.
If you don't have a static IPv6 address, in the Mode list, click DHCPv6; in the
•
Address Type list, click Normal, and click Send.
Description
that generates the second half of a unicast IPv6
address (last 64 bits) from a MAC address. You can also
specify the second half of the address by entering the
interface ID.
ANY It uses a 128-bit any cast address that you
specify. The printer needs to remember that the
current address is an any cast address, since its format
is the same as a unicast address.
The static IPv6 address of your printer.
Short for interface identifier. It is used to identify the
network interface of a host. You can specify the
interface ID here.
The current IPv6 address of your printer.
It is used for communications on a local network. The
address always starts with FE80.
65
Work with SATO WS4 Printer Utility