SATO WS408DT Technical Manual page 82

4 SATO WS4 Printer Utility
Download
Download is used to download files to your printer. Tabs in Download are related
to the emulation language you choose. Remember that you need to set up a
network connection before you use the LAN port for the data transfer. For further
details, see Set up LAN
connection.
Firmware
The Firmware tab displays in all emulation modes. It is used to update firmware.
For information about update firmware in SATO WS4 Printer Utility, see
firmware in SATO WS4 Printer
General
The General tab displays in all emulation modes. It is used to send command files
to your printer and perform tasks. Command files only run in their corresponding
emulations. For example, SZPL command files only run in SZPL emulation.
To run commands on your printer:
1. Type your commands in any text editor, such as Notepad or WordPad.
2. Save your commands as text files (.txt).
3. In the Input/Output Port list, click the port you want to use.
connection, Set up IPv6 connection
Utility.
78
Work with SATO WS4 Printer Utility
and Set up WLAN
Update